MELSOFT Library
FB for the temperature control module (other languages)
This FB library is for the MELSEC-Q/L temperature control module.
| Applicable model | Q64TCTT, Q64TCTTBW, Q64TCRT, Q64TCRTBW, Q64TCTTN, Q64TCTTBWN, Q64TCRTN, Q64TCRTBWN L60TCTT4, L60TCTT4BW, L60TCRT4, L60TCRT4BW |
|---|
| File name | Size | Last update | Version |
|---|---|---|---|
| fb-tc4_v110l_e.zip | 8,269,590 bytes | Jun. 30, 2017 | 1.10L |
| Relevant manual | Type | Language |
|---|---|---|
| FBM-M064-C | MELSEC-Q/L Temperature Control Module FB Library Reference Manual | English |
| FBM-M084-C | Chinese (simplified) |
| FB name | Function name | Description | Ver. |
|---|---|---|---|
| M+TC4_SetBPARAM | Basic settings | Sets the basic settings. | 1.00A |
| M+TC4_SetCNTBPARAM | Control basic parameters setting | Sets the control basic parameters setting. | 1.00A |
| M+TC4_SetCNTDPARAM | Control detailed parameters setting | Sets the control detailed parameters setting. | 1.00A |
| M+TC4_SetAlertsFunction | Alert function setting | Sets the alert function setting. | 1.00A |
| M+TC4_SetOtherSettings | Other settings | Sets the other settings. | 1.00A |
| M+TC4_SetConversion | Conversion enable/disable setting | Sets the conversion enable/disable setting. | 1.00A |
| M+TC4_SetProcessAlarm | Process alarm setting | Sets the process alarm setting. | 1.00A |
| M+TC4_SetRateAlarm | Rate alarm setting | Sets the rate alarm. | 1.00A |
| M+TC4_SetPVScaling | Process value (PV) scaling function setting | Sets the process value (PV) scaling function. | 1.00A |
| M+TC4_MoniCJTemperature | Cold junction temperature process value monitoring function | Sets the cold junction temperature compensation and reads the cold junction temperature process value. | 1.00A |
| M+TC4_Autotuning | Auto tuning | Sets and executes auto tuning. | 1.00A |
| M+TC4_Selftuning | Self tuning | Sets the self tuning setting and monitors the self tuning flag. | 1.00A |
| M+TC4_PIDControl | PID control | Reads the PID constants and executes a forced PID control stop. | 1.00A |
| M+TC4_HeaterDisconnection | Heater disconnection detection function | Sets the heater disconnection detection and monitors the heater disconnection. | 1.00A |
| M+TC4_LoopDisconnection | Loop disconnection detection function | Sets the loop disconnection detection and monitors the loop disconnection. | 1.00A |
| M+TC4_SimultaneousTemperature | Simultaneous temperature rise function | Sets simultaneous temperature rise function setting and monitors the status of the simultaneous temperature rise. | 1.00A |
| M+TC4_SetPeakCurrentSuppress | Peak current limit control setting | Sets the peak current limit control setting. | 1.00A |
| M+TC4_AlertStatus | Alert status check | Monitors an alert that has occurred. | 1.00A |
| M+TC4_ErrorOperation | Error operation | Monitors an error code and performs an error reset. | 1.00A |
| M+TC4_ReadVal | Value read | Reads the values to the specified devices. | 1.00A |
| M+TC4_ParamBackup | Setting value backup | Backs up the setting value or executes the default setting registration command. | 1.00A |
| M+TC4_SetPVAverage | Process value (PV) moving averaging process setting | Sets the number of moving averaging of the moving averaging process function for the temperature process value (PV). | 1.00A |
[Improvement history of the FB for the MELSEC-Q/L temperature control module from Ver.1.01B to Ver.1.10L (Jun., 2017)]
| No. | Description |
|---|---|
| 1 | The applicable version of GX Works2 has been added. ・This FB can be installed to GX Works2 of any language version. |
[Precautions for using the file]
Install the FB library to the personal computer in which GX Works2 of the following version has been installed.
- GX Works2 (Japanese): Version 1.86Q or later
- GX Works2 (English): Version 1.24A or later
- GX Works2 (Chinese (simplified)): Version 1.49B or later
- GX Works2 (Chinese (traditional)): Version 1.49B or later
- GX Works2 (Korean): Version 1.49B or later
[Installation method]
- Execute setup.exe in the fb-tc4_v110l_e folder.
- Install the FB library following the messages of the installer.
[How to use MELSOFT Library]
- Select [Library] - [Install...] from the [Project] menu.
- In the [Import Library to Project] dialog box, select the installed library and necessary FBs, and click the [OK] button.
- Paste the FB from the [Element Selection] window to the program.
[Precautions for using MELSOFT Library]
- Before applying the FB library of MELSOFT Library to a system, check sufficiently if no problem occurs in the control of the system.
